Tag Archives | f connector

Structured Cable at Home (‘F’ Patch Panel)

Here’s a quick update on my structured cable at home. Hopefully it will give you some ideas if you’re looking to do something similar.  The main goal here was to run all 4 LNB outputs from my dish and my UFH antenna back to a single point.

RG6 quad-shield run up from the floor through the existing data cable channel.

 

I used a piece of powder coated aluminum which I cut from a 2U server rack blanking panel and ran the RG6 cables through the wall and terminated them with ‘F’ joiners.

 

I came across a great free 2D CAD application called DraftSight which I used to create a template for drilling the plate and the wall.

 

Completed and all back together – featuring the aptly named ‘Patch’.  The cables connected to the completed patch plate all go back up the channel to the TV Server PC in the cupboard above.  I haven’t cabled any of the rooms (except the lounge) because everything is delivered over IP, however I have pre-drilled at the back of the plate and half drilled the plate for future expansion.

 

I’d like to thank Godfey who supplied all the RG6, F connectors, and tools. And also took the time to show me how to do PPC compression fittings.  Kiwi’s – if you’re in need to any of the gear to do this stuff Godfrey trades through TradeMe and gives the best service and prices around!

 

 

 

7