Panasonic Strada CN-MW250D USB Pinouts

In case there was any doubt that you really can find the most ridiculously obscure information on the internet….here are the pinouts for the Japanese Panasonic Strada¬†CN-MW250D Navi Headunit¬† (and probably most other models in the range). With a USB extension cable, some header cables and a soldering iron you can make your own cable. The unit works fine with a 16GB flash drive. Not sure what the max size is.

 

, , ,

8 Responses to Panasonic Strada CN-MW250D USB Pinouts

  1. 123 movies free May 15, 2020 at 4:04 pm #

    Thanks for such valuable information! it is very helpful to have such explicit and instructive explanations and demonstrations

  2. watchmovieonline May 12, 2020 at 3:25 am #

    The post is very good, I spend a lot of time reading here, but I have noticed that they do not update very often and there we have old ones you can visit us in watch movie online, so you can enjoy the best web content.

  3. 4k April 25, 2020 at 6:55 pm #

    change the connection port? usb our micos SDHC? PANASONIC IS VERY

  4. Cliff September 2, 2018 at 12:19 am #

    Hi Mark, did you get an answer for your question? I am also looking for this.

    • Mark February 25, 2019 at 9:57 pm #

      Nope, I did not get any answer to this. I am going to be replacing my unit with an Android head unit now

      • RhysGoodwin February 26, 2019 at 2:25 pm #

        Sorry for not replying guys. There’s no software out there for these things. They are basically useless expect for the functionality they currently provide to you.

        Be careful your expectations of the Android units. Make sure you understand what platform they are built on. Mine is built on RK3188 and using google maps on it is too slow for me. Try and find out what sort of processor it is and how much ram it has. Get the fastest process you can, it will probably still not be that fast. They are built for low cost not for performance.

    • moviesfree March 21, 2020 at 3:27 pm #

      Do you know how to improve the internet or how to change the connection ports?

  5. Mark July 11, 2018 at 11:22 pm #

    hi, do you know where I can get the software to reset my Panasonic CN-MW250D using an SDHC card?

    Mark

Leave a Reply